We find this down-tube e-bike battery pack offers flexible 36V or 48V options and nine capacities from 8Ah to 17.5Ah. Its 2A charger takes roughly 4–6 hours, while a 20A or 30A BMS discharge limit must match your motor and controller. The pack includes a lock, short-circuit protection, and a stated life exceeding 1,000 cycles, but weighs 3.5–5kg. Before buying, we’d verify voltage, connector, and fit; the specifications below clarify the key trade-offs.
Key Takeaways
- Choose from 36V or 48V models and nine capacities from 8Ah to 17.5Ah, based on your bike’s requirements and range needs.
- Match the charger to the battery: 42V for 36V packs or 54.6V for 48V packs; both use a 2A charger.
- Check compatibility carefully: match voltage, connector, and the pack’s 20A or 30A discharge limit to your motor and controller.
- Features include a lock, short-circuit protection, water-resistant housing, and a stated lifespan exceeding 1,000 cycles.
- Weighing 3.5–5 kg, the pack may limit range at lower capacities; protect it from heavy rain and charge between 0°C and 45°C.
Down-Tube Battery Specifications
This down-tube battery is available in 36V or 48V configurations, with capacities from 8Ah to 17.5Ah. We can compare its nine capacity choices to match your range needs and compatible e-bike setup.
Voltage options also determine which charger specification applies: 42V for the 36V battery or 54.6V for the 48V version. Both configurations use a 2A charger, with a typical full charge taking four to six hours.
Charging performance depends on selecting the correct charger and operating within the specified charging temperature range of 0°C to 45°C. The down-tube format suits compatible e-bikes and keeps the battery integrated with the frame.
Detailed features
Beyond its voltage and capacity options, the pack’s BMS supports a maximum continuous discharge of 20A or 30A, depending on configuration, for compatible motors rated up to 670W. We can assess its other operating details at a glance:
| Feature | Specification |
|---|---|
| Charging performance | 2A charger; 4–6 hours |
| Charge cutoff | 42V or 54.6V |
| Discharge efficiency | Up to 95% |
| Cycle life | More than 1,000 cycles |
| Safety features | Short-circuit protection, lock |
The water-resistant plastic housing resists heat and wear. We get a DC charging port, five-pin output, and temperature limits of 0°C to 45°C while charging and -20°C to 60°C while discharging.
Pros and Cons
We’ll assess the pack’s advantages, including its capacity options, protective features, and stated cycle life.
We’ll also weigh limitations such as its 3.5–5 kg weight and configuration-dependent motor compatibility. This comparison will help you judge whether its specifications suit your e-bike and riding needs.
Pros
For compatible e-bikes, this down-tube battery offers useful configuration flexibility, with 36V or 48V options and capacities from 8Ah to 17.5Ah. We can match a configuration to motors rated up to 670W, with 20A or 30A continuous discharge depending on the model.
Discharge efficiency reaches 95%, while Extended cycle life—more than 1,000 cycles—supports sustained use. The weather resistant housing offers some water resistance, and built-in short-circuit protection adds a useful safety measure. A safety lock and anti-theft feature help secure the pack.
The included 2A charger, keys, and manual make setup straightforward, with typical charging taking four to six hours.
Cons
Although the configuration range is broad, we must verify voltage, capacity, connector, and discharge-current compatibility before buying; the pack won’t suit every e-bike. Capacity choices span 8Ah to 17.5Ah, so smaller versions may deliver Limited range under high loads or on longer routes.
We should match the 20A or 30A discharge limit to the motor and controller; exceeding it risks shutdown or damage. Charging time also requires planning: the included 2A charger needs about 4–6 hours, depending on capacity.
At 3.5–5 kg, the pack adds substantial mass, and its water resistance doesn’t guarantee protection in heavy rain.
Concluding thoughts
Overall, this down-tube battery offers a flexible fit for compatible e-bikes, with 36V or 48V options, capacities from 8Ah to 17.5Ah, and BMS configurations rated for up to 20A or 30A. We’d match voltage, capacity, connector, and discharge current to your motor and frame before buying.
Its 2A charger needs about four to six hours, while claimed cycle life exceeds 1,000 cycles. The safety lock, short-circuit protection, and water resistance add practical safeguards, but don’t replace careful installation or weather protection.
For your riding experience and long term value, verify compatibility and choose capacity according to your range needs.
Frequently Asked Questions
How Can I Confirm This Battery Fits My E-Bike’s Mounting Rail?
We can confirm Mount compatibility by comparing your rail’s length, width, connector position, and locking points with the battery’s 105 × 43 × 430 mm dimensions. Check Rail measurements against your frame and verify connector alignment before purchasing.
Can I Take This Battery on an Airplane?
Maybe—but we can’t confirm from voltage alone. Check the battery’s watt-hours (volts × amp-hours), then verify airline battery limits and air travel rules with your carrier; e-bike batteries often exceed passenger carry-on allowances.
How Should I Store the Battery During Long Periods of Non-Use?
For long-term storage, we recommend a partial Storage charge rather than leaving the battery full or depleted. Use temperature control: keep it dry, between -20°C and 45°C, and check its charge periodically.
What Should I Do if the Battery Gets Wet?
If water reaches the battery, disconnect it immediately, switch it off, and don’t charge or use it. For Immediate Water Exposure, we should dry the exterior safely; Safe Battery Drying means professional inspection before reconnection.
Is Professional Installation Recommended for This Battery?
Yes, we recommend professional installation if you’re unsure about compatibility or wiring. Check Installation requirements for your e-bike’s voltage, connector, and mounting fit; choose a technician with relevant qualifications to verify safe installation and operation.
Conclusion
We find this down-tube pack a practical replacement when its voltage, connector, dimensions, and discharge rating match your e-bike. The 36V or 48V options, capacities up to 17.5Ah, safety lock, and short-circuit protection cover varied needs, while the included 2A charger takes about four to six hours. Its stated lifespan exceeds 1,000 cycles, but care and riding conditions matter. Measure your frame and confirm motor requirements before buying; the right fit keeps your ride on track.