We find this 48V e-bike battery offers 10Ah, 13Ah, 15Ah, and 20Ah options, with a 54.6V, 2A charger and BMS protection against common electrical faults. Its 20A continuous-discharge limit makes controller compatibility essential, despite stated support for 250W–1,000W motors. The 20Ah model measures 495 mm, so check frame clearance and confirm the four-pin connector before buying. Charging takes an estimated five to seven hours; we’ll examine fit, performance trade-offs, and ownership details next.
Key Takeaways
- Available in 10Ah, 13Ah, 15Ah, and 20Ah capacities; higher capacity generally provides longer riding time between charges.
- The 48V pack is rated for 250W–1,000W motors, but continuous discharge is limited to 20A; check controller demand.
- Built-in BMS protection covers short circuits, overcurrent, overcharging, overdischarging, and overheating.
- The included 54.6V, 2A charger takes an estimated 5–7 hours; four LEDs show charge in approximate 25% increments.
- Confirm voltage, four-pin connector, dimensions, and frame fit before buying; warranty, weight, and replacement cost are unspecified.
48V Battery Specifications
The HJGHY 48V lithium-ion battery is available in 10Ah, 13Ah, 15Ah, and 20Ah capacities, with aluminum-alloy and ABS construction. These Battery Capacity options let’s compare stored energy against expected riding needs: higher amp-hour ratings generally support longer use between charges.
The listed 48V rating identifies the battery’s nominal voltage; we should verify the compatible Voltage Range specified for our e-bike system before installation, since nominal voltage alone doesn’t confirm controller compatibility. The model designation is 66706547-B-48V10.4AH.
Its aluminum-alloy and ABS enclosure combines two material types, while the four capacity choices provide a clear basis for selecting a pack to match the intended setup.
Detailed features
Beyond its capacity options, the HJGHY pack supports motors rated from 250W to 1,000W and provides up to 20A of continuous discharge through a 4-pin connector. Its built-in BMS helps guard against short circuits, overcurrent, overcharging, overdischarging, and overheating.
Four LEDs show charge level in 25% increments, giving us a quick status check. The supplied 54.6V, 2A charger takes about 5–7 hours to recharge the pack. For a sound Charging routine, we should fully charge it before first use.
Its stated temperature range is −20°C to 60°C. The manufacturer rates service life at up to 1,000 cycles.
Pros and Cons
We’ll weigh the pack’s broad motor compatibility, built-in protection, and up-to-1,000-cycle rating against its 20A discharge limit and model-dependent dimensions.
We’ll also assess whether its 5–7-hour charging time and 25% LED indicators suit your needs. This comparison highlights the battery’s practical strengths and trade-offs.
Pros
A built-in BMS and 20A continuous-discharge rating make this 48V pack a practical match for compatible motors up to 1,000W, while four LED indicators give us a quick battery-level check. We also value its capacity options and manageable charging time.
| Feature | Practical benefit |
|---|---|
| 10–20Ah choices | Match capacity to range needs |
| 54.6V, 2A charger | Supports charging convenience |
| Aluminum-alloy and ABS case | Helps support ride comfort |
The BMS addresses overcurrent, overcharging, overdischarging, short circuits, and overheating. Its 4-pin connector and stated motor compatibility help us assess fit before purchase. With up to 1,000 stated cycles and operation from −20°C to 60°C, the pack offers useful specifications for varied riding conditions.
Cons
Although the pack offers broad motor compatibility, its 20A continuous-discharge limit may constrain higher-demand setups, so we should verify that the motor and controller stay within that rating. Battery weight isn’t specified, making it difficult to assess handling or frame-load suitability before purchase.
The 20Ah version’s 495 mm length may also limit fitment in compact frames, so we should measure the available space. Charging takes 5–7 hours, which may inconvenience riders needing quick turnaround.
Four LED indicators show charge only in 25% increments, limiting precision. We should also confirm warranty terms and replacement cost, since documentation doesn’t specify coverage or pricing.
Concluding thoughts
Overall, the HJGHY 48V battery offers several capacity options, a 20A continuous-discharge limit, and BMS protections for a range of compatible motors. We’d match its capacity to our route demands and verify that the motor’s current draw stays within that limit.
Before buying, we’d also confirm the 4-pin connector, mounting dimensions, and installation requirements. The LED gauge, included 54.6V charger, and stated cycle life support practical daily use, but actual range and Long term reliability depend on conditions and care.
For a sound ownership experience, we’d review the warranty terms, charge fully before first use, and seek professional installation when needed.
Frequently Asked Questions
How Can I Confirm This Battery Fits My E-Bike’s Mounting System?
We can confirm battery cradle compatibility by comparing your bike’s mounting rail dimensions with the pack’s measurements: 370 × 110 × 75 mm for 10Ah/13Ah, 390 × 110 × 75 mm for 15Ah, or 495 × 110 × 75 mm for 20Ah.
Is the Four-Pin Connector Compatible With My Bike’s Wiring?
We can’t confirm compatibility from the four-pin count alone. Verify pinout verification and connector polarity against your bike’s wiring diagram, and confirm voltage and signal assignments; ask a qualified technician before connecting if uncertain.
Can I Use a Different Charger if It Matches the Voltage?
Not by voltage alone. We recommend matching the specified 54.6V output and 2A charger current, then verifying connector polarity and fit. Don’t connect an incompatible charger; confirm specifications with the battery manufacturer before charging.
How Should I Store the Battery When It’s Not in Use?
Store at Partial Charge; Avoid Extreme Temperatures. We shouldn’t assume a full charge preserves capacity best: for storage, leave the battery partly charged, switch it off, and keep it dry. Check its charge periodically and recharge before use.
What Should I Do if the Battery Indicator Behaves Unexpectedly?
If your battery indicator behaves unexpectedly, check indicator readings after charging fully, then troubleshoot charge display by inspecting connections and charger operation. We can’t diagnose internal faults remotely; stop using the battery and seek professional assistance if discrepancies persist.
Conclusion
We find this 48V pack appealing for its capacity options, 20A continuous output, built-in BMS, and included charger. It offers useful safeguards, clear charge-level feedback, and a stated five-to-seven-hour charging time. But fit, connector compatibility, and motor demands still need careful checking; listed specifications don’t guarantee suitability for every e-bike. Before buying, we’d confirm dimensions, wiring, and controller requirements, then seek professional installation if needed. Match the pack to your setup, verify the details, and charge it as directed.